DESCRIPTION OF NUT FORMERS

Short Die Centre distance

The shortest die to die distance is a basic condition for-speed production because the shortest distance takes the least the time for the movement of transfering.

Self-Aligning Fingers

The transfer shaft is precisely made, while the transfer finger is automatic aligning with the punch and the die.

Double Eccentric Punch Adjustment

The centre of the punch is vertically and horizontally adjustable by aligning the punch holder and the punch lower block. The punch is advanced or retreated by raising or lowering the adjusting wedge.

The Paradoxical Adoption of the Roller Bearings has foll. merits

The friction is reduced to achieve high speed revolution is faciliated.

The ram will not get jammed at the upper dead point of the impact stoke because of the power failure or 
other happeinigs.
 
The forward and reverse and jogging is incilded to ease the settings of the tooling.

Replacement of the bearing is easy and can regain the precision of the machine

Cost Saving Device for die and Toolings

The Carbide die cores can be used longer than the traditional steel die cores. 

In a die set operators only need to change die cores when they are worn out and the die holders can be used repeatedly.

<<<Back // Next>>>

Home  |  About us | Nut  Forming Machine | Bolt Forming  Machine | Feedback  | Contact Us  | Email